Galvanized square tube of the technical requirements of this standard on behalf of the company's design standards for greenhouse vegetables to the company's design and construction. 1. vegetable greenhouse construction in east-west direction for the construction of direction, lighting design with the highest degree of the main; 2 standard vegetable greenhouses to 8-10 meters wide based, 60-100 meters long; 3. vegetable greenhouses back wall and side stuff with a stone wall building wall, back wall height, long after the inside back wall 4 meters high greenhouse slope, wall height of 0.8 meters. Gable from the inside of the bottom of the back wall of the ridge height of 1.7 m at 4.8 m, depth of the foundation should be greater than 0.5 m; 4. Design vegetable greenhouses north-south direction of not less than 4-5 m spacing breeding shed steel, does not affect the back light illumination conditions greenhouses degree; 5. vegetable greenhouse construction greenhouses dip between 40-45 ° steel production, after breaking length can not exceed 1.5 meters. 6. cement pillar or column structure using greenhouses pillars can not be less than the minimum diameter of 10 cm, buried under the column between 0.4-0.5 meters in the most appropriate; junction 7. steel structure construction, steel and embedded parts to welding process and column connections use special steel wire fastened; 8. surface insulation was laid to be carried out in the back wall of the wire to bind to the appropriate spacing of 10 cm apart were fastened. [1000-Tianjin Pipe - vegetable greenhouses introduction] tied arch tie rod is inserted. In the arch at the top and sides of 60-80 cm from the ground, in the longitudinal direction, symmetrical tie three longitudinal rods, should remain tied to the original distance between the arch when the steel shed and try fastened, so do not arch slide back and forth. To improve the robustness of the greenhouse, shed every 5-6 meters wide and 3-5 meters have a column, can shed 4-5 meters crossbar bracing rod instead of both sides, is in the studio every 4-5 road scaffolding, with four buried 30-40 cm long by 45 ° angle timber frame fixed on the scaffolding, looking down from above like "X" shape. Built studio head. Under the arch ends, insert steel shed 4-6 pillar stand, pillars and scaffolding will be tied together to form a studio head, in the lee of the head of the central design studio door, the door wide and 0.7 meters, about 1.3-1.5 meters high. To mitigate wind damage to the film, the studio head wind can gradually reduce the height of the scaffolding approach to transition. Breeding shed steel, steel shed, greenhouse accessories provided by the Tianjin Steel Pipe Co., Ltd. Rong thousand. Thousands of Tianjin Steel Pipe Co., Rong (www.tjqrgg.com) strong, credible, in Tianjin steel industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the 1000-pipe and you hand in hand into the brilliant, for a better future!